21.09.2016

Beckman Avanti J-30 I

Back to the list

Beckman Coulter Avanti J-30 I *** a HP centrifuge

BCAvanti30.jpg

Beckman Coulter Avanti J-30 I centrifuge. (Picture: Saku Mattila.)

Name and Model (Year of Manufacture / Installation)

Beckman Coulter Avanti J-30 I (?/?)

General Information

A high-performance centrifuge.

Key Specifications        

Set speed: Actual rotor speed ± 10 rpm from 10000 to 30000 rpm or equivalent RCF

Maximum force: 100 000 x g

Set time: From 1 min to 99 hours 59 min, or continuous (hold)
Speed range: 0 to 30000 rpm or equivalent RCF; 0 to 6000 rpm for elutriation

Temperature control: ± 2°C of set temperature (after equilibration)

Approximate acceleration time: Maximum, slow or timed (1 to 10 min from 0 to 500 rpm)

Approximate deceleration time: Maximum, slow, timed (1 to 10 min from 500 to 0 rpm) or off

Set temperature: -20 to +40 °C in 1 °C increments

Time - actual display: Indicates run time remaining (timed run) or elapsed time (hold run)

Maximum Heat Dissipation into Room under Steady-State Conditions: 2.0 kW (6900 Btu/hr)

Humidity restrictions: < 95% (non-condensing)

Key Features
  • The device is able to use one of the highest g-force fixed-angle rotors available for a high-performance centrifuge.
  • The SR Drive technology enables fast acceleration and deceleration times.
  • Friction Reduction System (FRS): A mechanical rotary vane pump reduces chamber pressure dependent on rotor and run speed.
Location, Contact Person

Nanoscience Center, YNC 045 /